Pentair PENTEK PSD25PB, Инструкция по установке и эксплуатации

Страница: 9 / 60

9 P1063 (10-03-19)
Pentair Pentek
*
Solar Drive Overview
The features of a Pentair Pentek Solar Drive’s printed circuit board are shown in Figure 7.
The installer needs access to these features when configuring the Pentair Pentek Solar
Drive’s DIP switches to
match the AC motor load and AC power source specifications
(described in greater detail on pages 11-12).
Figure 7: Pentair Pentek Solar Drive Printed Circuit Board Features Overview
Minimum Motor
Frequency
1-Phase, 3-Wire Enabled
Max Frequency
50Hz
Single Phase
120Vac
230Vac
Three Phase
60Hz
1 2 3 4 5 6 7 8 9 10 11 12
ON
Overload
Protection
1-Phase, 3-Wire Disabled
Flow Switch
DIP Switch
OFF
DIP Switch
ON
DIP Switches
Ribbon
Cable Connector
Unused
WARNING:
Do not modify DIP switch settings until power has been turned off and after 90 seconds
have passed for internal voltages to discharge below voltage of 50Vdc! Power must be
removed for DIP switch settings to take effect.