Pentair Maestro SB-CO-DIV-008B Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 52

Pentair Maestro SB-CO-DIV-008B Скачать руководство пользователя страница 9

24 V

06

Requirement for additional connected equipment:
- If you need to connect more equipment, the 4X Extension unit
can be linked (ref SB-PF-INA-001A, available as an option).

Supplementary inlets and outlets - (option with 4X Extension)

Possible connections on the 4 In inlets:

- Disabled:

Unused inlet, or makes it possible to disable an inlet which was previously used and to leave the

connection without any consequences.

- pH tank:

Affects the relevant input to a dry contact (normally open, the contact closes when there is no more

product) at a low level in the pH tank. In case of low level, the indoor display shows a symbol of a fuel pump in
front of the numerical pH value, an identical indicator appears on the internet account summary and an
e-mail is sent following the pre-set alert settings.

- RedOx tank:

Affects the relevant input to a dry contact (normally open, the contact closes when there is no

more product) at a low level in the disinfectant tank. In case of low level, the indoor display shows a symbol of
a fuel pump in front of the numerical RedOx value, an identical indicator appears on the internet account
summary and an e-mail is sent following the pre-set alert settings.

- Filtration stop:

Any closure of a dry contact on the relevant input will result in the filtration immediately

stopping.

- Pool cover:

Connecting a dry contact linked to closed sensor of a pool cover (the rolling shutter covers the

pool) automatically reduces daily duration production of a salt chlorinator.

- Not specified:

Connecting a dry contact has no effect on the operation of the technical room but allows you

to view, on the history menu, the activation time of a piece of equipment that you want to monitor (refilling, etc.)

as well as its real time status in the summary menu.

Possible connections to the 4 Aux outlets:

- Disabled:

Unused outlet, or makes it possible to disable an outlet which was previously used and to leave the

connection without any consequences.

- pH:

The relevant output closes a dry contact which makes it possible to control a pump which injects a pH

corrector. You must specify the type of pH- / pH + regulation in the relevant menu.

- If filtration is on:

The relevant output closes a dry contact when the filtration starts (useful for UV lamps).

- Aux:

The relevant output closes a dry contact

- Aux triggers filtration:

The closure of this output automatically conditions the filter to start.

«
...
7
8
9
10
11
...
»

Содержание Maestro SB-CO-DIV-008B





















































Отзывы:

Нет отзывов