manualshive.com logo in svg

Pentair Maestro SB-CO-DIV-008B, Инструкция по установке и эксплуатации, Страница: 11 / 52

Поделиться
Скачать
Pentair Maestro SB-CO-DIV-008B Скачать руководство пользователя страница 11

08

INTERNET RELAY - functioning

Initialisation fault or no supply

> Check the connection of the 220-V supply.

No network

> Check the connection of the Ethernet cable and 

check the internet connection.

DHCP resolution in progress

> Takes less than a second. If the flashing continues, 

check the activation of the DHCP in the management 

interface of your internet "box"

Network connection

> The internet relay is connected to the network.

Transmission of 

data in progress

Not lit

Slow flashing

Quick flashing

Lit

Not lit

Lit

Flashing

= not connected to the server 

> Check the power supply, connection of the Ethernet cable and the internet connection.

Connected to the server

 

Data transfer in progress 

  To monitor a pool for free on the internet, an account must be created in advance.

Creation of a free account at www.domotique-piscine.eu

> Connect to www.domotique-piscine.eu

> Click 

My account

> Click 

Create an account

> Complete the fields of the PERSONAL INFORMATION window

 

- Account type: A 

poolbuilder

 account is reserved for professionals.

> Complete the fields of the INSTALLATION INFORMATION window:

- Pool ID:

 

The Pool ID number is on the side of the probe unit and the control center. It is a 

five-digit number. Do not use the serial number of the internet relay or the indoor display.

- ID Key:

 

This is a unique security code which certifies the device. It is on the same label.

> Click 

Create account

The account has been created. 

BASIC

OWNER

POOLBUILDER

Reading of information: 

(pH, RedOx, Temp, etc.)

Comfort command: 

heating pump, lighting and if a 4x extension is connected, only the “Aux” outlets

are accessible 

Fixing the set point values: 

pH, water temperature

Assigning set point parameters: 

Injection time, pump volume, etc.

Setting installation parameters: 

type of disinfectant, pH+ or pH-, etc.

Setting the schedules: 

filtration, pH or RedOx priorities, etc.

Choice of account

Pool ID:

 12 345

ID Key:

 1A:2B:33:99

MAESTRO

Содержание Maestro SB-CO-DIV-008B





















































Отзывы:

Нет отзывов