230 V
EARTH
NEUTRAL (N)
PHASE (L)
12 V
< 1600 W
230 V
EARTH
NEUTRAL (N)
PHASE (L)
12 V
< 1600 W
230 V
EARTH
NEUTRAL (N)
PHASE (L)
12 V
> 1600 W
A1
A2
21
The lighting outlet is a dry contact and does not supply any voltage.
Control Center
connection and configuration of lighting.
1 - Connect the cables in accordance with the diagram.
2 - Via Menu Settings > Menu Lighting:
> Select manual for access to lighting via remote control.
> Select Schedule and set the time periods in the schedule setting sub-menu.
> Select off to permanently cut the lighting.
New installation:
Old installation:
On the remote control, a short press = ON / OFF, a long press = colour change (according to
the type of spotlight installed).
Total lighting power
below 1,600 W:
Total lighting power
above 1,600 W:
Connection in parallel to the lighting switch
contact
> Place the switch in open position (OFF).