Pentair INTELLICOMM II Скачать руководство пользователя страница 2

Customer Support

HERENTALS, BELGIUM (8:30 A.M. to 4:30 P.M.) CET

Website : www.pentairpooleurope.com

E-mail :  [email protected]

Declaration of conformity

We declare, under our sole responsibility, that the product identified in this declaration, and to which this declaration 

relates, are in conformity with the protection requirements of Council Directive 2016/42/EEG

  

The manufacturer, Pentair, has the right to modify the products without previous notice for as far as the characteristics are not 

really changed by this.

© 2018 Pentair, Inc. All rights reserved. This document is subject to change without notice.

Trademarks and disclaimers

: All Pentair trademarks and logos are owned by Pentair Inc. Pentair Aquatic Systems™ are trademarks 

of Pentair Inc. and/or its affiliated companies in the United States and/or other countries. Unless expressly noted, names and brands 

of third parties that may be used in this document are not used to indicate an affiliation or endorsement between the owners of these 

names and brands and Pentair Inc. Those names and brands may be the trademarks or registered trademarks of those third parties.

Failure to follow the instructions in this manual may result in serious adverse health effects, or even serious or fatal injury. Failure to 

follow the instructions in this manual will in all cases invalidate all guarantees and liability on the part of the manufacturer. 

INSTALLERS, OPERATORS AND OWNERS MUST READ THESE WARNINGS AND ALL INSTRUCTIONS IN THE OWNER’S MANUAL 

BEFORE USING THIS CLEANER. THESE WARNINGS AND THE OWNER’S MANUAL MUST BE LEFT WITH THE HOME OWNER.

EnglishEnglish

IMPORTANT SAFETY PRECAUTIONS

Important notice

Attention Installer

: This guide contains important information about the installation, operation and safe use of this product. This 

information should be given to the owner and/or operator of this equipment after installation of the product.

Attention User

: This manual contains important information that will help you in operating and maintaining this product. Please 

retain it for future reference. Consult Pentair with any questions regarding this equipment.

Before installing this product

, read and follow all warning notices and instructions which are included. Failure to follow safety 

warnings and instructions can result in severe injury, death, or property damage.  Visit www.pentairpooleurope.com for additional 

free copies of these instructions.

Risk of electrical shock or electrocution:

The IntelliComm II Interface adapter must be installed by a qualified electrician, according to the current National Electrical Code 

and local codes and ordinances. The electrician should also consult the local building department regarding local codes.
Improper installation will create an electrical hazard which could result in death or serious injury to pool users, installers, or 

others due to electrical shock, and may also cause damage to property.

Always disconnect power to the pool pump at the circuit breaker before servicing the pump

. Failure to do so could result in 

death or serious injury to serviceman, pool users or others due to electric shock

Consumer information and safety

This pool cleaner is designed and manufactured to provide many years of safe and reliable service when installed, operated and 

maintained according to the information in this manual. Throughout the manual, safety warnings and cautions are identified by 

the “       ” symbol.
•  To reduce the risk of injury, do not permit children to use this product.
•  To reduce the risk of injury, installation or service should only be attempted by a qualified Pool Service Professional.

When using the IntelliComm II communication center with the IntelliFlo pump, it is recommended to wire the IntelliComm power 

center to a ground fault circuit-interrupter (GFCI) to protect the circuit. A green colored terminal (or a wire  connector marked 

“G”, “GR”, “Ground” or “Grounding”) is provided within the terminal compartment in the Power Center transformer enclosure. To 

reduce risk of electric shock, connect this terminal or connector to the grounding terminal of your electric service or supply panel 

with a conductor equivalent in size to the circuit conductors supplying this equipment.

Limited Warranty Terms & Conditions

Before installing your IntelliComm II, review and understand all warnings, safety and warranty information in this guide. Failure to 

follow these instructions or improper installation of the cleaner can result in damage to the pool finish or the vinyl liner, Pentair 

Aquatic Systems disclaims any liability for repairs or replacement to any of these structures or components of the customer’s pool.

Limited Warranty

: 2 years

Further details

: www.pentairpooleurope.com

Содержание INTELLICOMM II


























Отзывы: