
13
EVERPURE
®
CONSERV
®
LT
-
S HIGH EFFICIENCY RO SYSTEM INSTALLATION AND OPERATION GUIDE
Figure 5
4. OPEN the valve for the inlet water.
5. Plug the power cord into a 115 V wall outlet.
6. Flush to drain for five (5) minutes.
7. Unplug the power cord.
1
2
4FC5
Flush to
Drain
Figure 6
6
Install the Pentair GRO-75EN RO Membrane
Cartridge:
The GRO-75EN RO Membrane Cartridge is installed in the
vertical position. There are three (3) quick-connect ports that
are labeled:
• Inlet - White
• Product (RO Water) - Blue
• Drain - Red
White Port
Figure 7
CAUTION: DO NOT remove the quick-connect elbow fitting
from the red tubing. This assembly contains
a flow control that may become damaged if
removed. The efficiency of the Everpure Conserv
LT-S Processor may be affected.
1. Remove the GRO-75EN RO Membrane Cartridge from its
packaging and position it with the single white port at
the top.
2. Press the cartridge into the clip on the back plate. The
cartridge may be moved up or down to line up with the
tubing connections.
7
Connect Tubing to Pentair GRO-75EN:
Blue
Red
White
Figure 8