Pentagram Cerberus Wi-Fi Lite, Инструкция по установке и эксплуатации

Страница: 29 / 64

Cerberus Wi-Fi Lite (P6381-0)
29
Regulation Domain – Select the name of your regulation domain.
Channel Number – A channel is the operating frequency in which a wireless device transmits
data. The number of channels you can select varies depending on the regulation domain you
select. Select a channel number the Wireless-G Router is to use for wireless communication.
To reduce interference, select a channel number that is further away from what the nearest
wireless device/network uses. For example, if the nearest wireless device/network is using
channel 6, set the Wireless-G Router to use channel 11.
Associated Clients – Click Show Active Clients to display a screen showing the list of
wireless clients that are currently connected to the Wireless-G Router.
Enable MAC Cloning (Single Ethernet Client) – You can set the Wireless-G Router to use
the same MAC address on all outgoing packets through the WLAN interface. Thus the
wireless network appears as a single Ethernet device to the external network. This increases
the security level. Enter a computer’s MAC address in six pairs of hexadecimal notation. For
example, 00a0f45a0010.
Enable Universal Repeater Mode – When you enable this universal repeater function, the
Wireless-G Router will extend the wireless distance to connect another wireless router or AP.
SSID of Extended Interface – Input the Parent SSID, when you select the Universal
Repeater Mode .
Apply Changes – Click Apply Changes to save the changes. The Wireless-G Router will
reboot to make the changes take effect.
Reset – Click Reset to undo the changes.
Help – Click Help to display on-line help information in a pop-up screen.
• •• •
Wireless Basic Settings: Site Survey
When you set the Wireless-G Router to work in wireless client mode, you can view a list
of available wireless networks/devices in the
Site Survey screen. Use this screen to
establish a wireless connection to a device/network.
SSID – This field displays the name of a wireless network/device.
BSSID – This field displays for Infrastructure mode. This field displays the name of a
wireless network.
Channel – This field displays the wireless channel number the wireless network/device
uses.
Type – This field displays the wireless operating type (Infrastructure or Ad-hoc).