Air Conditioners / Heating
Different brands of Air-
Con’s use different means of remotely turning On and Off.
Type1:
If the brand requires that the Output to be turned On and left On then you can use
either Output 1 or 4.
eg. Turning the output relay On will start the Air-Con and turning the relay Off will
stop the Air-Con.
1. Change the Output name as per page 11:
Naming Inputs and Outputs and Changing Names
4. Turn output On as per page 15:
Turn an Output ON or OFF
4. Turn output Off as per page 15:
Turn an Output ON or OFF
Type4:
If the brand requires that the Output be pulsed On and Off to turn the Air-Con On and
pulsed On and Off to be turned Off. The SMS-TEM-4 has a special command for this
type.
1. Connect the Air-Con to Output1
2. To turn On send : Air On (Output1 will pulse On and Off trigging the Air-Con On)
3. To turn Off send: Air off (Output1 will pulse On and Off trigging the Air-Con Off)
Type4: Heating
If the brand requires that the Output be pulsed On and Off to turn the Heating On and
pulsed On and Off to be turned Off. The SMS-TEM-4 has a special command for this
type.
4. Connect the Heating Input trigger to Output1
5. To turn On send : Heating On (Output1 will pulse On and Off trigging the Heating)
6. To turn Off send: Heating off (Output1 will pulse On and Off trigging the Heating
Please Note: This special command only works with Output1
Ezy Switch SMS-TEMP-4 Installation & Operation
