2
Table of Contents
COMMANDS
Getting Started
– Setting Up Initial User
7
Adding a User
8
Removing a User
8
Adding an Administrator
8
Removing the Administrator
9
Get a list of all the Users
9
Turn programmed numbers lookup on or off
9
Text all programmed numbers on or off
9
Turn All Texts OFF and Disable Inputs
10
Turn All Texts ON and Enable Inputs
10
Testing
10
Get a List of the Inputs
10
Get a List of the Outputs
10
Naming Inputs/Outputs and Changing Names
11
Change the Input Delays
11
Change Input to Normally Open or Normally Closed
12
Set Input as a latched Input
12
Set Input as a non-latched Input
12
Reset latched Input
12
Masking Inputs
12
Link an Input to an Output
13
Get linked information
13
Setup Input Tick off
13
Programming the Input reply message
14
Turn an Output ON or OFF
15
Turn an Output ON for a set time
15
Invert Output
15
Make an Output Pulse On and Off
16
Clear Output Pulse (Set to non-pulsed)
16
Make output public
17
Turn Output response On / Off
17
Save Output Status
17
Linking Outputs
17
Set Battery Alarm trigger voltage
18
Link Battery Alarm to Output
18
Check Battery Supply Voltage
18
Latching / Non-latching battery alarm
19
Reset Latched Battery Alarm
19
Alive text
19
Get Firmware Version
20
Resetting Unit
20
Get Signal Strength
20
Reset Unit to Factory Defaults
20
Get temperature
19
Set temperature alarms
21
Set temperature alarm reset temperatures
21
Turn temperature alarms On/Off
21
Set temperature alarm delays
21
Link temperature alarms to outputs
22
Appendix One
Table of User Selected Input and Output Names
24
Detailed Explanation of Input Delays
24
Trouble Shooting Guide
25
Appendix Two
SMS-TEM-4 Application Notes
27-30
