1230B0002001
About This Manual
iii
Caution
•
This product is equipped with a three-wire power cable and plug for user’s safety. Use the power
cable with a properly grounded electrical outlet to avoid electric shock.
Important
Motherboards, adapters, and disk drives are sensitive to static electricity discharge. These devices are
wrapped in antistatic bags to prevent this damage. Take the following precautions:
•
If you have an antistatic wrist strap available, use it while handling the device.
•
Do not remove the device from the antistatic bag until you are ready to install the device in the
system unit.
•
With the device still in its antistatic bag, touch it to a metal frame of the system.
•
Grasp cards and boards by the edges. Hold drives by the frame. Avoid touching the solder joints
or pins.
•
If you need to lay the device down while it is out of the antistatic bag. Lay it on the antistatic bag.
Before picking it up again, touch the antistatic bag and the metal frame of the system unit at the
same time.
•
Handle the devices carefully to prevent permanent damage.
Tools Required
You need a cross screwdriver or a flat screwdriver to install or remove the components in the server.
