1230B0002001
Hardware
Operation
2-6
2.4.2 To install the heat sink
Rotate and pull up the two levers.
Figure 2-8 Pulling up the two levers
Place the heat sink on the top of the
installed processor.
Push down the levers.
Rotate them back until the clips click
on the heat sink indicating that it is
locked.
Figure 2-9 Placing the heat sink on the top of the processor
Important:
Before you put the heat sink on top of the installed processor, please don’t
forget to put the processor grease on top of the processor.
2.4.3 To remove the processor and heat sink
Reverse above steps to remove the processor and heat sink from the board.