1230B0002001
Hardware
Operation
2-12
2.6.5 To install a daughter card
The daughter cards share many similarities on the installation and remove procedures, so here we take
the 1CH SCSI daughter card as the example for your reference.
1. Make the daughter card parallel to the
board surface and aim the hole at the
plastic pole.
2. Carefully insert the SCSI daughter card
until it fits completely the space.
Figure 2-18 Inserting the 1CH SCSI daughter card into the slot
2.6.6 To remove the daughter card
To remove the 1CH SCSI daughter
card:
Push aside the release button while
pulling the card out of the pole.
At the same time, lift the daughter
card out of the daughter card slot.
Figure 2-19 Lifting the 1CH SCSI daughter card out of the slot
