Penguin Computing Arctica 1600cs Скачать руководство пользователя страница 12

Страница: 12 / 71

Rev. 1.0

Penguin Computing

6. Stacking the Chassis

The chassis should not be stacked on any other equipment. If the chassis

falls, it can cause bodily injury and equipment damage.

7. Redundant Power Supply Connection - Electrical Hazard

This product includes a redundant power or a blank in its place. If a blank is

present, do not operate the product with the blank cover removed or not

securely fastened.

8. Double Pole/Neutral Fusing

This system has double pole/neutral fusing. Remove all power cords before

opening the cover of this product or touching any internal parts.

9. Multiple Power Inlets — Risk of electric shock and energy hazard.

The PSUs are all independent. Be sure to disconnect all power supplies to

ensure a powered-down state inside of the switch platform.

10. During Lightning - Electrical Hazard

During periods of lightning activity, do not work on the equipment. Do not

connect or disconnect any cables.

11. CopperCable Connecting/Disconnecting

Copper cables are heavy and inflexible, as such they should be carefully

attached or detached from the connectors. Refer to the cable manufacturer

for special warnings/ instructions.

12. Rack Mounting and Servicing

When this product is mounted or serviced in a rack, special precautions must

be taken to ensure that the system remains stable. In general you should fill

the rack with equip- ment starting from the bottom to the top.

13. Equipment Installation

This equipment should be installed, replaced, and/or serviced only by trained

and qualified personnel.

14. Equipment Disposal

Содержание Arctica 1600cs








































































Результаты поиска

Содержание Arctica 1600cs

Отзывы:

Похожие инструкции для Arctica 1600cs

Бренды по названию

Популярные бренды

Penguin Computing Arctica 1600cs, Руководство по установке

Результаты поиска

Содержание Arctica 1600cs

Отзывы:

Похожие инструкции для Arctica 1600cs

Бренды по названию

Популярные бренды