Rev. 1.0
Penguin Computing
37
Figure 31: Cables within the Rail
In the next step, you will be attaching the rails to the chassis, before doing
that, make sure the cables are laid properly within them. Avoid using
excessive pressure, as it can damage the cables.
Step 4.
While holding the cables together in the blade rail with one hand, use your other hand to
secure the blades to the chassis. Screw in the right blade with eight 4-40 flathead screws, and the left
blade with seven 4-40 flathead screws. The recommended torque is 0.49-0.54 Nm.
Figure 32: Attach the blades to the system
