Cyclone Universal & Cyclone Universal FX - User Manual
50
Figure 8-1: Cyclone IP Configuration Utility Default Screen
(
1) Drop-down Box 1
There are three options available in this drop-down box, of which “Ethernet Port” is displayed.
The other options are “Serial Port” and “USB Port”. Changing to any one of the three Ports will
list the devices which are found over that specific Port.
(2) Drop-down Box 2
Once one of the three (Serial, USB, or Ethernet) communication interfaces has been selected
in the first drop-down box, a list of all available Cyclone devices over that interface will be
displayed for selection.
(3) Specify IP
Opens the
Specify Cyclone IP Address
dialog. This dialog allows the user to manually add
and/or remove Cyclone Ethernet IP addresses from the list of IP addresses that is displayed
when the user chooses a specific Cyclone from those available. The drop-down list in the
“Specify Cyclone Ethernet IP to Remove From Registry” section shows the currently displayed
list of IP addresses.
If a Network Card other than the default is desired, the user may set which Network Card to
use by specifying the Ethernet IP of the Network Card and clicking “Set Network Card To Use.”
Otherwise this field should be left blank.
