PEmicro Cyclone Universal Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 71

background image

Cyclone Universal & Cyclone Universal FX - User Manual

43

6.3.6.1.1 Launch Programming

This allows the user to execute the programming function. The Cyclone will program the target
device, if able, using the currently selected programming image. This is functionally equivalent to
pressing the Start button.

6.3.6.1.2 Verify Data In Target

Performs a verify function on the data that has been programmed into the target device.

6.3.6.1.3 Toggle Power

Toggles the target power and makes sure all ports are driven to debug mode level.

6.3.6.1.4 Toggle Power, Let Device Run

Toggles the target power and maintains tri-state mode for all signals.

6.3.6.1.5 Validate Image CRC32

Allows the user to perform a CRC32 validation on the currently selected programming image.

6.3.6.2

Set Image Validation

Allows the user to choose between two validation settings: 1) validate the image each time the
Start button is pressed, or 2) do not validate the image.

6.3.6.3

Modify Next Serial Number

Presents options that display the current serial number and allow the user to increase or decrease
the next serial number. Tap “Current Image ID Selected” to view/choose the desired programming
image; tap “Current Alg ID Selected” to view/choose the desired programming algorithm; use
“Current CS ID Selected” to view/choose the desired Choose Serial file. The adjustment buttons
will display “Increase Not Allowed” and “Decrease Not Allowed” if the image/algorithm/CS files that
the user has selected to do not allow for this operation.

6.3.6.4

Show Current Image Stats

(FX Only)

Displays current statistics, if any, for Image Programmed Count & Maximum Allowed, Errors
Logged & Maximum Allowed, and Date Range Allowed. These limits can be set in the Image
Creation Utility when using the

Cyclone Universal

FX

.

Note:

When

Current Image Stats

is displayed as a home screen item, only Image Programmed

Count & Maximum Allowed are displayed on the home screen.

6.4

Cyclone Battery Pack

Manual control of stand-alone mode is also useful for performing field updates. In this situation,
there is often no access to a PC or power outlet. However, the Cyclone may be powered by using
a Cyclone PowerPack, which is a lightweight and compact lithium ion battery (available
separately).
The combination of the

Cyclone Universal

and

Cyclone Universal

FX

programmer and the

battery pack creates a fully operational field programming setup that is lightweight, compact, and
extremely portable. All that is required for a field update is to connect the battery-powered, pre-
programmed Cyclone to the target and initiate programming.

«
...
46
47
48
49
50
...
»

Содержание Cyclone Universal








































































Отзывы:

Нет отзывов

Похожие инструкции для Cyclone Universal

Бренд: Aaeon Страницы: 100

Бренд: Aaeon Страницы: 120

Бренд: Aaeon Страницы: 116

Бренд: Aaeon Страницы: 119

Бренд: Aaeon Страницы: 111

Бренд: Aaeon Страницы: 106

Бренд: Aaeon Страницы: 48

Бренд: Aaeon Страницы: 44

Бренд: Gan Systems Страницы: 24

Бренд: ST Страницы: 15

Бренд: Xilinx Страницы: 31

Бренд: Supero Страницы: 90

Бренд: JS Automation Страницы: 18

Бренд: Atmel Страницы: 30

KEMX-1600 Series

Бренд: Quanmax Страницы: 74

Бренд: Commell Страницы: 60

Бренд: DFI Страницы: 107

MAG B560M BAZOOKA

Бренд: MSI Страницы: 136

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды