30
31
|
MAINTENANCE AND CARE
MAINTENANCE AND CARE
CAUTION:
To ensure safe operation and optimal performance, check for wear
and damage and perform maintenance on a regular basis. Replace any damaged or
defective parts immediately. Do not use the bike until the repair is performed. Only use
original parts from the manufacturer. Changes or modifications to this unit not
expressly approved by Peloton could void the warranty.
CAUTION:
Always unplug the bike immediately after use and before cleaning or
performing maintenance. Service other than the procedures described here must be
performed by an authorized technician.
AFTER EVERY RIDE
EVERY 3 TO 5 RIDES
Cleaning:
Wipe down the bike using a damp cloth.
Cleaning:
Clean the bike thoroughly using a damp cloth and a mild household cleaner
diluted in water. Clean the touchscreen using an electronics wipe.
Cleats:
Use a 4mm Allen wrench to tighten any loose screws attaching your cleats to your
cycling shoes.
Saddle:
Make sure the saddle is parallel to the ground. Then use the included 13mm
wrench to tighten the seat-fixing nuts on both sides.
Leveling Feet:
If the bike rocks back and forth, turn each leveling foot clockwise (when
viewed from above) until it rests firmly on the ground.
Pedals:
Tighten any loose pedal with the included 15mm wrench. Pedals should be
tightened to 26lb-ft/35N•m of torque. Turn clockwise to tighten the right pedal and
counterclockwise to tighten the left pedal.
