14
15
|
SETTING UP YOUR BIKE
SETTING UP YOUR BIKE
LOCATION REQUIREMENTS
y
Place the bike on a solid, level and horizontal surface.
y
Use a mat to avoid damage to the bike and floor.
y
Allow a clearance of 24in/60cm on each side of the bike.
24
i n
/60
c m
24
i n
/60
c m
CAUTION:
Ensure that the power cable never passes under the bike. Always keep
the power cable clean and dry. Sweat, spills, and other damage to the power cable may
result in property damage or bodily harm.
MOVING THE BIKE
y
Tilt the bike forward onto the transport wheels. Lift the rear stabilizer while a second
person holds the handlebars.
y
Carefully roll the bike to the new location. Avoid uneven surfaces.
y
If the bike rocks or wobbles after being set down, turn each leveling foot clockwise to
lower it, or counterclockwise to raise it until it rests firmly on the floor.
24
i n
/60
c m
24
i n
/60
c m
