Pella 818K0100, Руководство по установке

Страница: 10 / 16

6"
16" MAX
O.C.
16" MAX
O.C.
16" MAX
O.C.
16" MAX
O.C.
6"
6"
6"
6"
6" 6"
6"
OUT-SWING
DOUBLE OPERABLE
6"
6"
16"
MAX.
O.C.
5A
6"
6"
16"
MAX.
O.C.
5A
5B
5E
16" MAX
O.C.
16" MAX
O.C.
6" 6"
6" 6"
IN-SWING AND OUT-SWING
SINGLE FIXED OR OPERABLE
6"
6"
16"
MAX.
O.C.
6"
6"
16"
MAX.
O.C.
5A 5A
5B
5E
DIAGRAM FOR
PLACEMENT OF
FRAME SCREWS &
INSTALLATION CLIPS
5
INSTALL THE PERFORMANCE UPGRADE
OR HURRICANESHIELD FASTENERS
PERFORMANCE UPGRADE & HURRIC
ANESHIELD DOORS •
PERFORMANCE UPGRADE
Frame Screw Method:
Note: If installing with installation clips,
proceed to Step E.
A. Jambs:
Out-swing:
On the room side of the jamb;
drill and counter-sink 13/64" deep diameter
clearance holes through the door frame
only and not into the rough opening in the
locations shown. (See Out-Swing diagram in
lower right).
In-swing: Open door panels;
drill and
counter-sink 13/64" deep diameter clearance
holes through the door frame only and not
into the rough opening in the locations shown.
(On hinge jambs; clearance hole locations are
centered between hinges).
Hinge Jambs:
See
(5A) In-Swing diagram
(upper right). Fixed and
Lock jambs diagram for
placement of threshold
screws and installation
clips (see out-swing
diagram in lower right).
5A
5A
Out-Swing
INTERIOR
EXTERIOR
In-Swing
EXTERIOR EXTERIOR
EXTERIOR
INTERIOR
INTERIOR
INTERIOR
Fixed
Placement
Vent
Placement
Fixed
Placement
Drill 13/64" clearance holes
through the frame
Drill 13/64"
clearance holes
through the frame
Vent
Placement
B.
Drill 13/64" deep clearance holes through the door frame head
only and not into
the rough opening in the locations shown.
C. Drill 1/8" x 1" deep pilot holes through the clearance holes and into the rough
opening framing in the head, jambs, and threshold of the unit frame.
Note: Be certain to shim between jambs and rough opening at all screw locations.
In-Swing Sill
Out-Swing Sill
Screw
Location
Out-Swing Sill
In-Swing Sill
6"
16" MAX O.C.
16" MAX O.C. 6"
6" 6"
5A
6" 16" MAX O.C. 16" MAX O.C. 6" 6" 6"
In-Swing
Clearance
Hole
Location
Clearance
Hole
Location
Clearance
Hole
Location
Clearance
Hole
Location