Installation
LOCATION AND MOUNTING
Location
Choose a location for the Z8 that is not exposed to weather, and where controls and connections
are accessible. The Wireless Module can be removed from the Z8 and is waterproof if installed
onto a plastic electrical box with the provided gasket placed in-between (Reference Page 13).
Gasket is required to create a water tight seal between Wireless Module and plastic electrical
box (Reference Page 14).
CAUTION
1. Disconnect power supply before connecting any wiring to device to prevent
electrical shock or damage to equipment.
2. This guide is designed for certified, trained, and experienced service technicians.
Failure to follow installation instructions does not alleviate installer responsibility to
protect the equipment and property device is being connected too. If at anytime there
becomes concern or confusion about how to install or use this device, immediately
stop what you are doing and either contact Pelican Wireless Systems or a Pelican
Wireless System’s distributor.
WARNING
1. This equipment is designed to communicate over radio frequency to other Pelican
equipment only. If this equipment is not installed and used in accordance with the
instruction manual, you may experience wireless interference. This device has been
tested and complies with FCC rules and regulations.
CAUTION
Always remove the Wireless Module if the Z8 is installed enclosed in metal (e.g.
inside the HVAC unit). The Wireless Module will not be able to communicate if metal
is blocking its signal.
WHEN INSTALLING THIS PRODUCT...
1. Read these instructions carefully and thoroughly. Failure to follow these instructions or
improper installation, service, adjustments, maintenance, and/or use can result in personal
injury, damage to personal property, and/or cause a hazardous and dangerous situation.
2. Check the ratings and description given in this specification to make sure the product is
suitable for your application.
3. Installer must be a trained and experienced technician. Follow all safety codes and
regulations and all local and state building codes. Read instructions thoroughly and follow
all warnings or notes.
4. After installation is complete, check product operation as provided in these instructions.
6
