65
6 Troubleshooting
SYMPTOM
POSSIBLE CAUSE
SOLUTION
You have switched a cooking
zone on but the display
keeps fl ashing.
The pan you are using is
not suitable for induction
cooking. or has a diameter
of less than 12 cm.
Use a suitable pan, see (see
page 48 and 49).
A cooking zone suddenly
stops working and you hear
a signal.
The preset time has ended.
Switch the bleep off by
pressing any key.
The hob is not working
and nothing appears in the
display.
There is no power supply
due to a defective cable or
a faulty connection.
Check the fuses or the electric
switch (if there is no plug).
A fuse blows as soon as the
hob is switched on.
The hob has been wrongly
connected.
Check the electrical
connections.
The hob simply switches off.
You accidentally touched the
On/Off button or touched
two buttons at the same
time.
Switch the hob back on.
Fault code ER22.
The control panel is fi lthy or
has water on it.
Clean control panel.
Fault code E2.
The hob has overheated.
Let the hob cool down and
then use a lower setting.
Fault code U400
The voltage is too high and/
or the hob is not properly
connected.
Have your connection changed.
Fault code
.
You held a button too long.
Do not hold the button too
long.
Other fault codes.
Defective generator.
Contact the service
department.
Содержание IDK674
Страница 38: ...38 Notities...
Страница 74: ...74 Notes...