Pelgrim IDK674, Руководство пользователя

Страница: 52 / 74

52
3 Operation
3.1.3 Boost
The ‘Boost’ function is used to cook at maximum power for a short period of time
(maximum 10 minutes). The power is reduced to setting 9 at the end of the maximum
boost time.
Switching on the boost function
The hob is switched on and a pan is on the cooking zone.
1. Touch the
button. (You can also use this button if a power has been set).
2. Touch the
or the button for the desired cooking
zone.
The display shows ‘P.’. The boost function is immediately
active.
If the
or the buttons are not touched, the red light to the right above the
button will fl ash for 3 seconds and then stop. You will hear a single bleep.
Switching off the boost function
The boost function is switched on, the display shows ‘P.’.
1. Touch the
button.
The display shows power setting 9, the boost function is switched off. Or:
2. Touch the
or the button at the same time.
The display shows setting ‘0.’, and the cooking zone is switched off.
•
Two cooking zones behind each other
º
Two cooking zones that are behind each other infl uence each other. The power is
automatically distributed when these cooking zones are used at the same time.
This does not have any consequences up to setting 9. Selecting the Boost setting
for one of the cooking zones, however, automatically switches the other cooking
zone to a lower setting.
º
If one of the cooking zones is set to boost and you want to set the other zone
to setting 9 or Boost, the cooking zone that is set to boost will automatically be
switched to a lower setting.
º
Two cooking zones that are beside each other do not infl uence each other. You
can set both cooking zones to Boost.