Installation and Operating Manual
Page 13
DRYING PROGRAMMES
-
AUTOMATIC TIME CONTROL
You can also select additional functions:
EXTRA DRY
can be used when either
AUTO LOW
or
AUTO HIGH
is selected.
EXTRA DRY
is for fabrics that are thicker and more difficult to dry such as overalls.
ski suits, etc.
ECO
can be used when
AUTO HIGH
is selected.
ECO
is a programme that utilises thermal energy so the programme is longer than
normal, but consumes less energy. If
AUTO ECO+
has been chosen as a drying
programme as above, this function is already pre
-
selected.
DRYING PROGRAMMES
-
MANUAL TIME CONTROL
The cabinet is started by pressing the
ON/OFF
button
.
By default, the cabinet will be activated with the previous programme selection. If no
programme has been selected previously, the cabinet has been without power or is completely
new, the cabinet is started in
AUTO ECO+
by default (an automatic programme).
To start up manual time control:
Selection of manual programme:
To activate the manual drying process, press the
MAN
button,
To get to the desired programme, press
MAN
one or more times.
See details below for what each programme does:
Only the fan is started. This
programme is highly energy
-
efficient and very gentle on the
laundry. Use this programme
when you have plenty of time
to dry your laundry.
MAN
ECO+
now lights up.
Both the fan and the element
are active, but temperature is
limited within the cabinet. Use
this programme when you
require sensitive fabrics to dry
in a shorter time.
MAN LOW
now lights up.
Both the fan and the element
are active. The temperature
restriction is significantly higher
than in MAN LOW. This
programme dries the fabrics
quickly.
MAN HIGH
now lights
up.
The display shows a standard drying time, but this can increased or decreased with
this button.
Press
START/STOP.
If the LED is lit, this shows that the process is under way.
The selected drying time is shown on the display. Once the time has ended, the
process stops automatically.
NOTE.
Avoid opening the door when the cabinet is in operation as this will extend the drying time.
When the door is opened
-
P
-
will be displayed. The cabinet will stop heating although the fan will
continue to run. If the door remains open for 5 minutes the cabinet will then switch itself off. Closing
the door within the 5 minute period will restart the drying process. If an AUTO programme has been
interrupted the programme will start anew. If a MANUAL programme has been interrupted the
countdown will continue whilst the door is open.
