Installation and Operating Manual
Page 12
CONTROL PANEL
DRYING PROGRAMMES
-
AUTOMATIC TIME CONTROL
NOTE.
Set the temperature and time to suit the most delicate articles to be dried.
To start up automatic time control:
The drying cabinet is equipped with both automatic and manual time controls.
The cabinet is started by pressing the
ON/OFF
button
.
By default, the cabinet will be activated with the previous programme selection. If no programme
has been selected previously, the cabinet has been without power or is completely new, the
cabinet is started in
AUTO HIGH
by default.
AUTO HIGH
lights up and
START/STOP
flashes.
Selection of other automatic programmes:
If this is OK, start the cabinet by pressing
START/STOP.
The LED at START/STOP stops flashing, and is lit with a steady glow.
The estimated drying time is shown on the display, where the time is counted down. After the
time has ended, the process stops automatically.
To activate the automatic drying process, press the
AUTO
button,
To get to the desired programme, press
AUTO
one or more times.
See details below for what each programme does:
Only the fan is started. This
programme is highly energy
-
efficient and very gentle on the
laundry. Use this programme
when you have plenty of time
to dry your laundry.
AUTO
ECO+
now lights up.
Both the fan and the element
are active, but temperature is
limited within the cabinet. Use
this programme when you
require sensitive fabrics to dry
in a shorter time.
AUTO LOW
now lights up.
Both the fan and the element
are active. The temperature
restriction is significantly higher
than in AUTO LOW. This
programme dries the fabrics
quickly.
AUTO HIGH
now lights
up.
