6 of 18
ISSUED: 07-16-10 SHEET #: 061-9050-4 03-04-11
Cables may be routed through top, bottom, or rear
of main enclosure assembly. An additional available
option for cable entry while maintaining the waterproof
seal of the enclosure is the ROXTEC cable gland (
F
).
Install ROXTEC hardware to top, bottom, or rear of
enclosure assembly (
A
).
NOTE:
If cables are routed
through rear enclosure assembly hole, wall mount is
required for mounting to wall.
Follow the ROXTEC manufacturers' instructions for
installation included in ROXTEC cable gland (
F
) box.
Install cord cover plate assembly (
K
) to remaining
open holes of enclosure assembly (
A
) as shown in
detail 4.
2
Installing Cables
K
A
Removal of Rear Supports:
Loosen 1/4-20 x
2.36" screws at top and bottom of rear supports as
shown in detail 2. Lift up rear supports, tilt to the
side, and pull out of carriage supports as shown in
detail 3.
DETAIL 2
DETAIL 3
DETAIL 4
1-2
REAR SUPPORTS
REAR SUPPORTS
1/4-20 SCREWS
1/4-20 SCREWS
CARRIAGE
SUPPORTS
