12 of 18
ISSUED: 07-16-10 SHEET #: 061-9050-4 03-04-11
Hook adapter brackets (
B
) onto wall plate (
J
) then
slowly swing screen in as shown in fi gure 7.1.
7
• Always use an assistant or mechanical lifting equipment to safely lift and position the fl at panel screens.
WARNING
DETAIL 6
fi g. 7.1
B
J
J
B
Swing rear supports up to access safety screws as
shown in fi gure 7.2.
Turn safety screws, using 4 mm allen wrench (
L
),
clockwise at least six times to prevent screen from
being removed as shown in detail 6.
NOTE:
To lock
the screen down, tighten safety screws to wall plate
as shown in detail 6.
Route cables through ROXTEC cable seal and plug
into appropriate connection.
fi g. 7.2
Mounting and Removing Flat Panel Screen
SAFETY
SCREWS
• Do not postion AV and power cables close to heater
or damge to cables may occur. See page 15 for
more information.
CAUTION
