5 of 18
ISSUED: 07-16-10 SHEET #: 061-9050-4 03-04-11
Optional Removal of Bay Door
1
Bay door may be removed for ease of installation
to mounting surface.
NOTE:
Removal of bay door
is optional. Installation may be completed without
removing bay door.
Insert fl athead screwdriver under brass clip of gas
spring shown in detail 1 and pry up. Pull gas spring
away from bay door.
DETAIL 1
GAS SPRING
BRASS CLIP
BRASS CLIP
BAY DOOR
MAIN ENCLOSURE
ASSEMBLY
10-24 x .5"
PHILLIPS SCREWS
A
fi g. 1.1
• Grasp bay door fi rmly. Bay door will swing freely when gas springs are removed.
WARNING
Remove center set of 10-24 x .5" phillips screws
from inside of enclosure assembly (
A
) as shown in
fi gure 1.1. Slide bay door to the right to disengage
hinges and lift off of enclosure assembly.
1-1
