Adding several results (ADD)
To add several counting results, please press the „ADD“ - key for activating the addition mode.
If the addition mode is activated, you can see the message „AD“ in the display.
For deactivating the addition function again, please press the „ADD“ - key again.
Batch function (Batch)
By pressing the keys „1 - 0“, you can activate the batch function and adjust the batch number.
The machine will stop counting by reaching the batch number. For continue counting, please remove the
notes from the stacker. For clearing the batch number and deactivating the batch funciton, please press
the „C“ - key.
Adjusting the counting speed (SPEED)
For setting the counting speed, please press the „SPEED“ - key. You can choose between three different
counting speeds.
Information:
By using the value counting mode / dimension detection,
you can only adjust the speed „1“ or „11“.
Dimension detection (DD) (banknote height) (optional)
By using the „DD“ - function, the machine can recognize smaller bills in a bundle (only by height of the
banknote). The machine will stop counting by recognizing a smaller bill, the message „dd“ will be shown
on the display. For activating / deactivating the „DD“ function, please press the „DD“ - key.
The adjustment „11“ is recommended.
Adjustment of the hopper (gap adjusting screw)
For realising a correct counting result, it´s very important to adjust the „gap adjusting screw“ correctly.
Please turn the screw clockwise for adjusting the gap for thicker banknotes and counterclockwise for
thinner banknotes.
For Euro banknotes the adjustment „0“ is recommended.
Adjustment of density (DEN)
For setting the density, please press the „DEN“ - key.
Level 1 (1)
: Thin, light printed bills.
Level 2 (11)
: Middle thick and printed bills.
Level 3 (111)
: Thick, dark printed bills.
For Euro banknotes the adjustment „11“ is recommended.
12
