Peavey AQ 12, Руководство по эксплуатации, Страница: 8 / 20

BT LEVEL (11)
Controls the gain or output level of the input signal from the Bluetooth® signal feed. It is used to directly set the
system output level for a given Bluetooth® input signal.
SIG LED (12)
Illuminates green when a signal source is present at either the analog input jack (6), or the Bluetooth® signal
source. Extremely low level signals will not cause it to illuminate, but any normal level signal will do so.
Preset Selector Switch (13)
Allows the user to select which Preset EQ function is engaged.
For reference purposes, the Acoustic preset is nominally the flattest response.
THRU/MIX OUT jack (14)
This jack is intended for the use of linking multiple AQ™12’s in a line
or to provide a feed to a powered subwoofer, or other electronics that needs to receive a full range version of the
input signal. When the MIX/DIR button is engaged (in), it provides a mixed signal consisting of the signal at the
input jack (6) and the Bluetooth® signal source
MIX/DIR button (15)
When in the normal (out) position, the THRU/MIX OUT jack (14) passes the input signal present at the input
jack (6) thru to another device. Pushing the button in engages the MIX function, where the Bluetooth® signal
source is mixed with the analog input present at the input jack (6).
POWER LED (16)
It illuminates when the power switch is on and power is present.
LIMIT LED (17)
It turns Red when the power amp engages the “Soft Limiting” and Compression system. Should only be blinking
occasionally, if it is on all the time, or most of the time, the signal will be highly compressed.