Peavey AQ 12, Руководство по эксплуатации, Страница: 6 / 20

switch (3) activated to turn on the powered AQ™12 speaker system.
IEC POWER CORD CONNECTION (2)
This receptacle is for the IEC line cord (normally supplied with the correct pins and wiring for your locale) that
provides AC power to the unit. It is very important that you ensure the PVs 12 Sub has the proper AC line volt-
age supplied. You can find the voltage setting for yourPVs12 Sub by checking the voltage selector switch on the
rear panel of the unit. See above section.
Please read this guide carefully to ensure your personal safety as well as the safety of your equipment. Never
break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a
ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly.
To prevent the risk of shock or fire hazard, always be sure that the mixer and all other associated equip-
ment are properly grounded.
IEC POWER CORD CONNECTION (2)
This receptacle is for the IEC line cord (supplied) that provides AC power to the unit. It is very important that
you ensure the AQ™12 has the proper AC line voltage supplied. You can set the proper voltage for your
AQ™12 using the Voltage Selector switch (1) on the rear panel of the unit.
Please read this guide carefully to ensure your personal safety as well as the safety of your equipment. Never
break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a
ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To
prevent the risk of shock or fire hazard, always be sure that the mixer and all other associated equipment
are properly grounded.
ON-OFF SWITCH (3)
This rocker switch supplies AC power to the AQ™12 when switched to the ON position. The ON position is with
the top side of the switch pushed “in” or nearly flush with the rear panel.