Peak Scientific SL 100 cc, Руководство пользователя

Страница: 32 / 40

Page 32
Switching the Unit Off
The unit can be switched off at any time using the following procedure.
The generator may be restored to a depressurised state by pressing and holding the
front button for at least three seconds. This will cause the generator to cease hydrogen
production, illuminate the water tank blue, and exhaust any stored hydrogen through
the exhaust port at the rear of the generator. The generator may then be switched off
by the power switch on the rear panel.
Cleaning
Clean the outside of the generator, using only warm soapy water and a clean damp
cloth. Ensure the cloth is thoroughly rung out to remove excess fluid prior to use.
Cleaning should only be undertaken with the power switched off and
the power cord removed from the rear of the Generator.
Under no circumstances should any solvents or abrasive cleaning
solutions be used as these can contain fumes that could be harmful to
the Generator.
Water tank should be cleaned as a minimum on an annual basis in line with instructions
given step 2 of the DI cartridge change instructions.
CAUTION