Page
Fuze Part # 4532 - Patent Pending
May 2007
May 2007
Fuze Part # 4532 - Patent Pending
Page
Page
Fuze Part # 4532 - Patent Pending
May 2007
May 2007
Fuze Part # 4532 - Patent Pending
Page
È
WARNING
È
$Q\DGMXVWPHQWVWRVHDWKHLJKWPXVWEHSHUIRUPHGE\DTXDOL¿HGWHFKQLFLDQ
*
13” Seat height is only available with 12” urethane rear wheels.
1. Rear Axle Adjustment
a. Remove rear wheels and rear axles to expose axle receivers
b. Loosen and remove locknut holding axle receiver to axle plate
c. Withdraw axle receiver from axle plate and reposition to new desired
location
1RWH3'*UHFRPPHQGVWKHD[OHUHFHLYHUEHSRVLWLRQHGLQWKHUHDUPRVWVHW
of holes for additional stability when the chair is in tilt.
d. Tighten locknut to lock axle receiver to axle plate.
e. Repeat for other side.
2. Caster Fork Height Adjustment
a. The front caster fork has 2 positions that are 1” apart.
b. To reposition the caster wheel to a different position on the caster fork,
loosen the locknut and remove the capscrew holding the wheel to the
fork assembly.
c. Reposition wheel to new location and insert capscrew.
d. Tighten locknut.
K. Seat Depth
È
WARNING
È
$Q\DGMXVWPHQWVWRVHDWGHSWKPXVWEHSHUIRUPHGE\DTXDOL¿HGWHFKQLFLDQ
Wheelchair seat depth may be adjusted from 15” to 20” deep. Seat depth is
adjusted by adjusting the front seat rail extensions and/or by adjusting the
back support brackets.
1. Seat Depth Adjustment
a. Remove the two (2) fasteners holding the front seat rail extension to the
seat rail.
b. Reposition the front seat rail extension to the desired position.
c. Reinstall the two fasteners.
d. Remove the two (2) fasteners holding back support bracket to seat rail.
e. Reposition the back support bracket to the desired position.
f. Reinstall the two fasteners.
g. Repeat for the other side.
27
