Page
Fuze Part # 4532 - Patent Pending
May 2007
May 2007
Fuze Part # 4532 - Patent Pending
Page
Page
Fuze Part # 4532 - Patent Pending
May 2007
May 2007
Fuze Part # 4532 - Patent Pending
Page
5. Make sure that ALL bolts are tight before operating wheelchair.
6. As with any vehicle, the wheels, casters and tires should be checked
periodically for cracks and wear, and any defective components should be
replaced.
&OHDQTXLFNUHOHDVHD[OHVRQFHDZHHNZLWKD7HÀRQOXEULFDQW'2
127XVH:'LQRLORURWKHUSHQHWUDWLQJOXEULFDQWVRQTXLFN
release axles. Otherwise, binding and/or damage to the wheelchair may
occur.
B. Tools Required
The following tools are needed to make adjustments to the wheelchair
1. Philips Screw Driver
$OOHQ.H\V´´´´´
$GMXVWDEOHRU2SHQ(QG:UHQFKHV´´´´´
HDG'ULYHUZLWHDGV´´´´´´
C. Cleaning
Periodic cleaning of all surfaces will help
keep you wheelchair looking good and operating
properly. All surfaces may be cleaned with warm
water and a mild detergent. Do not use abrasive
cleaners on any surfaces.
D. Recommended Maintenance Schedule
Initiall
y
Inspect / A
djust
W
eek
ly
Inspect / A
djust
W
eek
ly
CHECK
GENERAL
Wheelchair rolls straight (No excessive drag or pull to one side).
CLEANING
Clean upholstery and armrests
Inspect / A
djust
Periodically
WHEEL LOCKS
Make sure they are not interfering with tires rolling.
Pivot points are free of wear and looseness.
Wheel locks are easily engaged.
REAR WHEELS
No excessive side movement or binding when
lifted and spun.
Quick-relaese axles lock properly (if applicable).
Inspect wheels and tires for cracks and wear.
Replace when necessary.
FRONT CASTER
Inspect wheelfork assembly. Caster should spin freely.
Wheel bearings are clean and free of moisture.
Inspect wheels and tires for cracks and wear.
Replace when necessary.
SEAT / BACK UPHOLSTERY
Inspect for rips and sagging.
Inspect fastenings to ensure they are secure.
17
