Page
Fuze Part # 4532 - Patent Pending
May 2007
May 2007
Fuze Part # 4532 - Patent Pending
Page
Page
Fuze Part # 4532 - Patent Pending
May 2007
May 2007
Fuze Part # 4532 - Patent Pending
Page
3. TROUBLESHOOTING
You will need to adjust your chair from time to time for best performance.
8VHWKHFKDUWSURYLGHGEHORZWRWURXEOHVKRRWDQG¿QGDVROXWLRQ
1RWH0DNHRQO\21(FKDQJHDWDWLPH
4. MAINTENANCE
(YHU\VL[PRQWKVWDNH\RXUZKHHOFKDLUWRDTXDOL¿HGWHFKQLFLDQIRUD
thorough inspection and servicing. Regular cleaning will reveal loose or
worn parts and enhance the smooth operation of your wheelchair. To operate
properly and safely, your wheelchair must be cared for just like any other
YHKLFOH5RXWLQHPDLQWHQDQFHZLOOH[WHQGWKHOLIHDQGHI¿FLHQF\RI\RXU
wheelchair. Initial adjustments should be made to suit personal body structure
DQGSUHIHUHQFH7KHUHDIWHUIROORZWKHVHPDLQWHQDQFHSURFHGXUHV
A. Maintenance Safety Precautions
È
WARNING
È
1. After ANY adjustments, repair or service and BEFORE use, make sure all
attaching hardware is tightened securely - otherwise injury or damage may
result.
2. DO NOT over tighten hardware attaching to the frame. This could cause
damage to the frame tubing.
3. If the tires are pneumatic, DO NOT use the wheelchair unless it has the
SURSHUWLUHSUHVVXUH'2127RYHULQÀDWHWKHWLUHV)DLOXUHWRIROORZ
these suggestions may cause the tire to explode and cause bodily harm.
Recommended tire pressures will be listed on the sidewall of the tires.
4. Periodically adjust wheel locks in correlation to tire wear. Refer to the
WHEEL LOCKS SECTION of this manual.
Sy
mptoms
Chair
Veers to Rig
ht
Chair
Veers to Left
Sl
uggish
Tu
rning or
Pe
rformance
Casters F
lut
ter
Sq
ueaks and Ra
ttles
Loosenes
s in Chai
r
Chai
r Contacts Only
On 3
Wheels
Solutions
Check tire pressure.
Check for loose nuts and bolts.
Check caster angle.
Check that both casters
contact the ground. If not,
add proper spacers between
bottom surface of lower bearing
and top of fork stem nut. Check
on a flat surface.
16
