PCTEL SeeGull MX, Справочник по аппаратуре

Страница: 9 / 25

SeeGull
®
MX Hardware Reference Manual
PCTEL, Inc. Page 6 Rev. K
Layer 3 decoding is available for GSM, LTE
FDD, TD-LTE, and UMTS
[WCDMA/HSPA(+)] technologies. This
option, provides decoding for:

GSM BCCH (Broadcast Control
Channel) messages

UMTS [WCDMA/HSPA(+)] BCH
(Broadcast Control Channel) Type 3
messages

LTE BCCH (Broadcast Control
Channel)
In the GSM BCCH, types 1, 2, 3, 4, 9, and
type 13 messages are supported. In the
UMTS [WCDMA/HSPA(+)] BCH, the Master
Information Block (MIB) and the System
Information Blocks (SIBs) 1, 2, 3, 5, 7, 11
and 19 are supported. In the GSM BCCH
and the UMTS [WCDMA/HSPA(+)] BCH,
these messages contain the Cell Identity
and Local Area Identification information
broadcast by the network infrastructure.
This information includes the:

MCC (Mobile Country Code),

MNC (Mobile Network Code),

LAC (Location Area Code)

RAC (Routing Area Code)
These messages also contain significant
information on the configuration, activity and
performance of the network. This includes
information concerning:

Neighbor list

Mobility management (handovers,
etc.)

Group and broadcast call control

GPRS mobility management,
transparent transport and session
management

Radio resource management

SMS messages

Location services

Uplink Interference parameters
(UMTS [WCDMA/HSPA(+)] only).
LTE BCCH layer 3 messages convey
system information about the cell. These
messages contain the cell identity, channel
bandwidth, mobility management
(handovers), neighbor lists, barred cells,
intra-frequency selection, public safety
messages, etc. It supports decoding of the
MIB and SIBs 1-13.
The SeeGull MX supports scanning of
numerous GSM BCCH, UMTS
[WCDMA/HSPA(+)] BCH, and LTE BCCH
channels during the same test.
LTE (FDD and TDD) 2x2 MIMO Option
(OP530)
MIMO testing is available for 2x2 LTE FDD
and TD-LTE. This enables users to
determine the maximum throughput
capability of the RF environment and the
degree of correlation between the 2 base
station transmit antennas for the purpose of
optimizing throughput. Note, MIMO
hardware and 2 of the same bands are
required for MIMO testing with the SeeGull
MX.
Clarify Options
(OP421 SeeGull EX/MX WCDMA Clarify
Option (Single Band))
(OP422 SeeGull EX/MX WCDMA Clarify
Option (Dual Band))
(OP426 SeeGull EX/MX GSM Clarify
Option (Single Band))
(OP427 SeeGull EX/MX GSM Clarify
Option (Dual Band))