PCTEL SeeGull MX, Справочник по аппаратуре

Страница: 18 / 25

SeeGull
®
MX Hardware Reference Manual
PCTEL, Inc. Page 15 Rev. K
6. Indoor Kit Information
Deployment of wireless data services is
resulting in further increases in indoor traffic
and coverage requirements. The
measurement, enhancement and optimization
of indoor coverage are now an increasingly
important aspect of wireless engineering.
The PCTEL SeeHawk Indoor Kit comprises a
complete set of accessories that enable the
indoor use of the PCTEL SeeGull scanning
receivers. The Indoor Kit provides a cost
effective solution for evaluating existing in-
building coverage and for planning, deploying
and testing indoor coverage systems.
The PCTEL Indoor Kit provides the right
solution for indoor walk testing that enables
wireless engineers to address the three key
steps of indoor coverage assessment and
planning:

Evaluating Indoor Coverage from
Outside Networks

Planning New In-Building Networks

Coverage Validation for New or
Existing In-Building Networks
6.1. Indoor Kits
The indoor kit for the SeeGull MX consists of
a backpack (shown in
Figure 13 ) and related
accessories for convenient indoor
measurements using the SeeGull scanning
receiver for indoor measurements. Battery life
is approximately 4 hours. The OP431 Walk Kit
consists of

Backpack

Battery pack

MX USB data cable

MX power cord

AC power cord

EU adapter for AC power cord
Figure 13. MX Indoor Kit
6.2. RF Indoor Antenna Information
PCTEL offers wideband rubber duck style
antennas for indoor use. There are three
models depending on the frequency
required.

OP228: Indoor Ant. 700-1050
MHZ, 1550-2300 MHZ

OP229: Indoor Ant., 2300-2700
MHZ

OP241: Indoor Ant., 698 -2700
MHZ