SeeGull
®
MX Hardware Reference Manual
PCTEL, Inc.
Page 11
Rev. K
Figure 7. Connections and Switches for SeeGull MX
Figure 8. Connections and Switches for SeeGull MX
Setup with 8 MIMO ports
7. During power-up, the status LED
(3) is amber for up to several
minutes
. After initialization is
complete the status LED turns
green. If the LED turns dark red,
the unit has failed the power-up
test. Please contact Technical
Support.
8. Install and start your PC drive test
program. If you are using
SeeHawk, refer to the SeeHawk
User Manual for specific
instructions.
9. The system is ready for use.
Afterwards, please turn the
Indoor/Outdoor switch (5) to OFF
and disconnect all cables.
2. USB data
connector
6. Power
connector
5. Indoor /
Outdoor switch
3. Status
Indicator
1. SMA
Connectors to
RF antennas
4. SMA Connector
to GPS antenna
(use SMA to SMB
adapter)
1. SMA
Connectors to
RF antennas
