PCTEL SeeGull MX, Справочник по аппаратуре

Страница: 4 / 25

SeeGull
®
MX Hardware Reference Manual
PCTEL, Inc. Page 1 Rev. K
1. Preface
1.1. Purpose
This document is a user’s manual for the
SeeGull MX Scanning Receiver. It
describes the main features and options
available for the SeeGull MX and provides
instructions related to setup, operation, and
maintenance of the scanners. This
document may be supplemented by other
documentation for the SeeGull MX or
related PCTEL products and applications.
1.2. Applicability
The SeeGull MX Scanning Receiver
conducts drive test and site-specific
measurements of mobile networks around
the world to optimize wireless network
performance, survey tower sites, monitor
base stations, demodulate RF signals and
analyze wireless market data.
The SeeGull MX Scanning Receiver is a
software-defined receiver, capable of
supporting multiple protocols and up to 8
frequency ranges. It can be configured for
TD-LTE, LTE FDD, UMTS
[WCDMA/HSPA(+)], CDMA, EV-DO and
GSM technologies. The following bands are
supported for LTE FDD with a subset of
these bands supported for UMTS
[WCDMA/HSPA(+)], CDMA, EV-DO and
GSM:

E-UTRA 12 (Lower 700 MHz A/B/C)

E-UTRA 17 (Lower 700 MHz B/C)

E-UTRA 13 (Upper 700 MHz C)

E-UTRA 18 (Lower 800 MHz Japan)

E-UTRA 19 (Upper 800 MHz Japan)

E-UTRA 20 (800 MHz EU)

E-UTRA 5 (850 MHz)

E-UTRA 26 (Upper Ext 850 MHz)

E-UTRA 27 (Lower Ext 850 MHz)

E-UTRA 8 (900 MHz UMTS)

E-UTRA 11 (1500 MHz Japan)

E-UTRA 21 (1510 MHz Japan)

E-UTRA 9 (1700 MHz Japan)

E-UTRA 3 (1800 MHz)

E-UTRA 2 (1900 MHz)

E-UTRA 25 (1990 MHz [Ext. 1900])

E-UTRA 4 (2100 MHz AWS)

E-UTRA 1 (2100 MHz UMTS)

E-UTRA 7 (2600 MHz IMT)
The following bands are supported for TD-
LTE:

E-UTRA 38 (IMT Extension 2.5G)

E-UTRA 39 (1.8 TDD)

E-UTRA 40 (2.3 TDD)

E-UTRA L41 (Lower 41 2.5G)

E-UTRA U41 (Upper 41 2.5G)
For more information about the SeeGull MX,
please contact your sales or marketing
representative (contact information provided
in
Section 8.1 ).
Features

Fast scanning speeds

High dynamic range

Low false detection rate

Scans multiple bands without
performance degradation

Concurrent measurements in:
o
LTE/WCDMA/GSM
o
LTE/CDMA/EV-DO

Built-in GPS

LTE FDD Measurement Averaging

LTE FDD and TD-LTE MIMO

LTE FDD eMBMS

Blind Scan for all technologies

LTE, UMTS (WCDMA/HSPA(+),
GSM Layer 3,

Outdoor and Indoor Modes

USB Interface

Plug-and-play capabilities

Compatibility with industry-leading
drive test, data analysis, and RF
planning tools