SeeGull
®
HB
flex
TM
Reference Manual
PCTEL, Inc.
Page 12
Rev F
•
Radio resource management
•
SMS messages
•
Location services
•
Uplink Interference parameters
(WCDMA).
The LTE BCCH Layer 3 option conveys
system information about the cell. These
transport blocks contain the cell identity,
channel bandwidth, mobility management
(handovers), neighbor lists, barred cells,
intra-frequency selection, public safety
messages, etc. It supports decoding of the
MIB and SIBs 1-16, 24, 25 and 32.
The FD-LTE NB-IOT Layer 3 option
conveys system information about the cell.
It supports the decoding of the MIB and SIB
1.
The CDMA Layer 3 option provides this
information:
•
Synch Message.
•
System Parameter Message.
•
Extended System Parameter
Message.
•
Neighbor List Message.
•
Extended Neighbor List Message.
•
CDMA Channel List Message.
•
CDMA Extended Channel List
Message
The SeeGull HB
flex
supports scanning of
numerous GSM and LTE BCCH, and
WCDMA BCH channels during the same
test.
Mobile Blindscan Option (Mobile
Measurement):
OP505 - All Technologies (GSM, WCDMA,
CDMA, EVDO, TD-LTE, FD-LTE)
Mobile Blindscan (Mobile Measurement)
combines the functionality
to detect new
channels in defined Bands, known as
Blindscan, and performs additional
measurement on the identified channels. When
channels are no longer recognized, they are
removed from the monitoring channels.
LTE (FDD and TDD) 2x2 and 4x2 MIMO
Option (OP617)
MIMO testing is available for 2x2 and 4x2
FD-LTE and TD-LTE. This enables users to
determine the maximum throughput
capability of the RF environment and the
degree of correlation between the 2 base
station transmission antennas for the
purpose of optimizing throughput.
Dynamic Spectrum Sharing (OP527- DSS)
This option is available on FD-LTE and TD-
LTE for users to accurately measure the
LTE frames for cases employing Dynamic
Spectrum Sharing with 5G NR.