SeeGull
®
HB
flex
TM
Reference Manual
PCTEL, Inc.
Page 19
Rev F
measurements taken from the SeeGull
HB
flex
scanning receiver.
4.4. Ethernet Instructions
The Ethernet feature enables TCP/IP
communication between HB
flex
and a
control PC (or laptop). PC DHCP
connection is recommended for remote
access to the scanner. The user also has
the option of manually entering a Static IP
Address.
Note: If the TCP socket connection is
lost without a proper shutdown, the
scanner must be power cycled before
accepting a new connection.
Ethernet Using DHCP
Using this method, an IP address, Subnet
mask, and Gateway are acquired on the PC
automatically from a DHCP server. The
scanner is then assigned a corresponding
IP address with identical Subnet mask using
SeeGull Assistant. Make sure the selected
IP address for Scanner is not in use or
duplicated.
Set Up PC:
1. Click Start menu, then click on
Control Panel.
Figure 6 - Control Panel
2. Click Network and Internet.
Figure 7 - Network and Internet
3. Click Network and Sharing Center.
