PCTEL SeeGull HBflex, Справочник по аппаратуре

Страница: 27 / 39

SeeGull
®
HB flex
TM
Reference Manual
PCTEL, Inc. Page 27 Rev F
6. Walk Test Kit Information (to be
updated)
This section discusses walk test options that
can be used with the SeeGull scanning
receivers.
Deployment of wireless data services is
resulting in further increases of in-building
traffic and coverage requirements. The
design, testing, and optimization of indoor
coverage are now an increasingly important
aspect of wireless engineering.
The PCTEL SeeHawk Walk Test Kit
comprises a complete set of accessories
that enable the indoor use of the PCTEL
SeeGull HB
flex scanning receiver. The
Walk Test Kit provides a cost-effective
solution for evaluating existing in-building
coverage and for planning, deploying, and
testing indoor coverage systems.
The PCTEL
’s Walk Test Kit provides the
right solution for
“Walk Testing” that enables
wireless engineers to address the three key
steps of in-building coverage assessment
and planning:
•
Evaluating In-building Coverage
from Outside Networks
•
Planning New In-Building Networks
•
Coverage Validation for New or
Existing In-Building Networks
6.1. Walk Test Kits
PCTEL offers a Walk Test Kit for the
SeeGull HB
flex scanning receiver, the IND-
CBL-ANT-HB Walk Test Kit as shown in
Figure 22 . It delivers a convenient way to
carry and power the SeeGull HB flex
scanning receiver for in-building
measurements. The IND-CBL-ANT-HB
Walk Test Kit consists of:
•
OP204 - USB data Cable
•
OP304-BP - HBflex Backpack package
includes backpack and telescopic
antenna mounts
•
OP417- MXflex Battery pack
•
OP691 Indoor Antennas (x2)
•
OP307 - Omni Antenna for mmWave
(x2): includes Antenna with bracket and
1m pigtail cable
Figure 22 - IND-CBL-ANT-HB kit
6.2. Bluetooth Communications RF
Antenna Information
The use of Bluetooth Communications
requires an antenna for operation which
comes standard with the HB
flex .