PCTEL SeeGull HBflex, Справочник по аппаратуре

Страница: 21 / 39

SeeGull
®
HB flex
TM
Reference Manual
PCTEL, Inc. Page 21 Rev F
Set Up Scanner
After the IP address and Subnet mask are
confirmed for the PC, the scanner must be
assigned a corresponding IP address and
identical Subnet mask using SeeGull
Assistant. Please refer to the SeeGull
Assistant User Guide for more information.
NOTE: The SeeGull Assistant application
is available at PCTEL’s website under
the support page.
Note: Consult your IT department to
confirm IP Address and Subnet mask for
the PC and then to Assign
corresponding address and identical
Subnet mask to the scanner.
The IP address network identification must
be identical to the connected PC
’s IP
address. The IP address host cannot be
identical to the connected PC.
The subnet mask number must be identical
for both the scanner and connected PC.
Example:
PC:
IP Address: XXX.YYY.ZZZ.
2
Subnet Mask: 255.255.255.0
Scanner:
IP Address: XXX.YYY.ZZZ.
100
Subnet Mask: 255.255.255.0
IP Address Note:
XXX.YYY.ZZZ is the network identification
and is identical for the PC and scanner.
The bold numbers are the host identification
and cannot be identical.
Default Network Configuration:
The
HB flex
comes with the following default
network configuration:
DHCP: Disabled
IP Address: 192.168.2.100
Subnet mask: 255.255.255.0
Default Gateway: None
Ethernet Using Static IP Address:
Using this method, an IP address and
Subnet mask are entered in to the PC
manually using numbers assigned by your
IT Department. A corresponding IP address
and identical Subnet mask are then
assigned to the scanner using SeeGull
Assistant.
Set Up PC
Repeat steps 1-6.
8. Select Use the following IP address.