SeeGull
®
IB
flex
®
Reference Manual
PCTEL, Inc.
Page 37 of 42
Rev T
10. Appendix B: Signal Analyzer Adapter
The Signal Analyzer Adapter is an optional hardware device for the SeeGull IBflex scanning
receiver. It is designed to work with the scanner and the Signal Analyzer (SA) feature in
SeeHawk Touch to address activities around network equipment, such as Distributed Antenna
Systems (DAS) verification and commissioning.
The adapter features include:
•
The hardware adapter holds the scanner enabling ease of use for connecting to the
equipment for conducting the required measurements.
•
The tablet with SeeHawk Touch collection software is also held by the adapter for ease of
access of setups, displays and recording results.
•
RF 1 connector has an extra 45 dB of attenuation built in for measuring higher level signals.
(NOTE: This should be entered in the settings in the SA.)
Follow these steps to insert the scanner into the adapter:
1. Slide the scanner a few inches into the adapter, ensuring the top of the scanner is closest to
the tablet holder.
