SeeGull
®
IB
flex
®
Reference Manual
PCTEL, Inc.
Page 18 of 42
Rev T
8. Turn on power switch.
The “Psave” position lowers the power consumption to 10 watts
for cellular technology testing (Wi-Fi testing and/or Wi-Fi/Bluetooth Communications
increases power consumption).
9. If saving data to SD card, insert SD card into SD port. SD card use is limited to 32
Gigabytes. (
IBflex Only
)
10. If you are using a Windows computer: Install and start the collection software. The
system is now ready for use.
11. If using an Android device: Refer to the Application User Manual. The system is now
ready for use.
Figure 9 - SeeGull IBflex Scanning Receiver Front Display
Figure 10 - SeeGull IBflex Lite Scanning Receiver Front Display
3.3. LEDs
The
GPS LED
colors indicate the following
states:
•
Green: GPS module locked to GPS
signal
SMA Connector(s) for RF
antenna(s)
Power switch
SMB Connector for
the GPS Antenna
USB data connector for PCs (COM)
SMA Connector for Wi-Fi
Communications/Bluetooth
USB port for testing
via Wi-Fi adapter,
connecting to
Android device
SD card port
Ethernet Port (LAN)
GPS LED
Bluetooth and Wi-Fi LED
SD LED
SMA Connector for RF antenna
USB data connector for PCs (COM)
Bluetooth and Wi-Fi LED
SMA Connector for Wi-Fi
Communications/Bluetooth
SMB Connector for
the GPS Antenna
USB port for testing
via Wi-Fi adapter,
connecting to Android
device
Ethernet Port (LAN)
Power switch
GPS LED