SeeGull
®
IB
flex
®
Reference Manual
PCTEL, Inc.
Page 23 of 42
Rev T
The IP address network identification must
be identical to the connected PC
’s IP
address. The IP address host cannot be
identical to the connected PC.
The subnet mask number must be identical
for both the scanner and connected PC.
Example:
PC:
IP Address: 192.168.2.
2
Subnet Mask: 255.255.255.0
Scanner:
IP Address: 192.168.2.
100
Subnet Mask: 255.255.255.0
IP Address Note:
192.168.2 is the network identification and
are identical for the PC and scanner.
The bold numbers are the host identification
and cannot be identical.
4.5. CDMA/EV-DO Holdover Operation
When a GPS signal is present, CDMA and
EV-DO technologies use the GPS data for
timing information to decode the signals.
With the Holdover option, the SeeGull IB
flex
will continue to accurately decode the pilots
and cell IDs for a period of 4 hours in the
absence of any GPS signal. To get the best
performance of the Holdover option during
indoor measurements, we recommend that
the GPS be locked for at least 30 minutes
before using the SeeGull IB
flex
scanning
receiver in an unlocked / holdover mode
(with power maintained). The 30 minutes
applies to units with serial number 81607xxx
or higher, or those that have the applicable
modification applied by PCTEL. Contact
Customer Service for more information.
4.6.
Battery
Dispose of used batteries properly. Do not
disassemble and do not dispose of in fire.
Replace battery with PCTEL OP429 (or
Inspired Energy
®
model NC2040HD34)
only. Use of another battery may present a
risk of fire or explosion.
Entsorgen Sie verbrauchte Batterien
ordnungsgemäß. Nicht zerlegen und nicht
ins Feuer werfen. Um den Akku
auszutauschen, nur PCTEL OP429 (oder
Inspired Energy® Modell NC2040HD34).
Verwendung einer anderen Batterie kann
eine Brandgefahr und Explosionsgefahr
präsentieren.
