6 Camera Control for the pco.dimax
14
pco.dimax User’s Manual V1.00 © PCO AG, Germany
6.6
The “Recording" sheet
Recorder Mode
In sequence mode the camera will stop after the memory (i.e. the active
camRAM segment) is completely filled. In ring buffer mode the camera will
record until it is stopped.
Acquire Mode
The acquire mode gives you the ability to enable or disable the recording by
an external signal. If set to external the camera will only record images if the
external signal enables recording (see chapter 6.7).
Time Stamp
A time stamp can be placed into the upper left corner of the image. It can
be either off, binary, binary with text or text only. In binary mode there will
be filled the first 16 pixels with the time stamp. In binary and/or ASCII there
will be placed text into the image in a way, where the content of the image
will be replaced by the text. This feature is not yet released for the
pco.dimax
!
Record Stop Mode
After ‘stop recording’ the camera will continue recording for the number of
images entered in ‘Skip Images’. In this mode you are able to capture a free
selectable amount of pre- and post-event images.
Содержание pco.1300
Страница 1: ...pco dimax User s Manual preliminary ...
Страница 28: ...Appendix 28 pco dimax User s Manual V1 00 PCO AG Germany Appendix ...
Страница 42: ...42 pco dimax User s Manual V1 00 PCO AG Germany A9 FAQ tbd ...
Страница 44: ......