PCO.IMAGING pco.1300, Руководство пользователя

Страница: 34 / 44

Appendix
34
pco.dimax User’s Manual V1.00 © PCO AG, Germany
How to uninstall:
•
Locate and right click "My Network Places" in the Start Menu and
choose “Properties”.
•
A new window "Network Connections" opens. Right-click on the
corresponding Local Area Connection to the NIC for which you want to
configure the network component settings and select “Properties”.
•
A new window “Local Area Connection Properties” opens. Left-click on
the item “pco.camera with GigE” and press “Uninstall” to remove the
driver from your OS.
Activating/Deactivating
The checkbox next to “pco.camera with GigE” is checked for activating and
unchecked for deactivating.
Note: It is absolutely essential that the PCO GigE driver is only activated at the specific NIC
that is physically connected to your camera! In addition, just the service “pco.camera with
GigE” and the “Internet protocol (TCP/IP)” should be activated for each NIC used for PCO
cameras:
A3-3 Network Environment/Patch Cable
A correct configuration of the network is important for the throughput of the
image data which could be brought out. It is mandatory that any
component used for the network connection between camera and
computer is compatible with a data throughput of 1000Mbps. Some of
these components are the NIC, Router, Hub, Switch, etc., but also the
patch cable.
The quality of patch cables is specified in categories. It is necessary to use
category 5e-, 6-, or 7- patch cables
for a network connection with a data
throughput of 1000Mbps.
Virus protection needs to be inactive or uninstalled.