PCE Instruments PCE-LOC 20, Руководство пользователя

Страница: 20 / 45

© PCE Instruments
18
The above figure shows the example how to change Input High (100%) Range from 20.000 to
10.000 mA.
There are mainly 2 types of EditBox in this device. In most of the EditBox changing of decimal
point and changing of sign is not allowed. But there are few EditBox, where these are allowed.
These types of EditBox are Scaled Low(0%) & High(100%) Range of measure & source, Alarm
Low & High value and Editing of Source Value in RUN Page.
The below figure shows the example how to change decimal point of the Input Scaled High(100%)
Range
To change the sign of the value, shift to the sign digit and pressing UP or DOWN key will toggle
the sign.