PCB Piezotronics Larson Davis SoundAdvisor NMS044 Скачать руководство пользователя страница 16

Страница: 16 / 59

NMS044 Reference Manual

Establishing Service for the Gateway

2.2 Establishing Service for the Gateway

Establishing cell service for the gateway includes purchasing a SIM card with cellular

service and installing it. As indicated in this section, you can also opt to have Larson Davis

install and activate the SIM when your system is prepared at the factory.

2.2.1 Purchasing Cellular Service

Review this section prior to purchasing cell service.

The NMS044 system requires a SIM card with a data plan. SIM cards should be configured

with a static IP address or alternatively with a dynamic IP address used in conjunction with

the optional SoundLink service, as described in this section. Where available at an

affordable price, we recommend using a SIM card configured with a static IP address.

Step 1.

When shopping for a cellular provider, verify that the service supports a public,

static IP address, and that incoming connection requests are not blocked.

If this type of SIM card and service is available, move to the next step; if not, we

recommend the SoundLink online hosting service. This enables you to establish

a secure connection to your gateway(s) using any IP address on a virtual private

network (VPN). Contact Larson Davis or your representative for more

information about this subscription-based service.

Step 2.

Purchase a SIM card with the following features:

•

A data plan sufficient to the NMS044 data usage

The amount of data your system requires is variable. For most applications, 4

GB per month is sufficient. While precautions have been taken to prevent high

data use, the NMS system doesn’t regulate data use. Significant charges may

occur if the purchased data amount is exceeded.

•

No messaging/voice is needed.

Step 3.

If your SIM card is configured with a static IP, request the APN (Access Point

Name) from your cellular provider. You will need it later in the process to

configure your system for remote use.

TAKE NOTE

If you would like Larson Davis to install the SIM and configure

remote communication along with your equipment order, mail your SIM card,

contact information, and APN (if applicable) to the following address:

NMS System Configuration

Larson Davis Manufacturing Center

1681 West 820 North

Provo, Utah 84601 USA

Recommended next step:

•

If Larson Davis is installing the SIM card, move to

2.3 "Connecting the Gateway

to Cellular Service" on page 15

. If Larson Davis is not installing the SIM card,

move to

2.2.2 Installing the SIM Card

Содержание Larson Davis SoundAdvisor NMS044




























































Результаты поиска

Содержание Larson Davis SoundAdvisor NMS044

Отзывы:

Бренды по названию

Популярные бренды

PCB Piezotronics Larson Davis SoundAdvisor NMS044, Справочное руководство

Результаты поиска

Содержание Larson Davis SoundAdvisor NMS044

Отзывы:

Бренды по названию

Популярные бренды