P a y R a n g e | B l u K e y P r o | U s e r M a n u a l
P a g e
18 | 23
Insert one of the wires from BluKey
Pro harness into the stopped
opening of the splice until it hits
the end of the opening.
You may need to clip the wire from
harness connector that is not going to be
used.
You should be able to see the wire in the
window by the metal brace.
Crimp the metal brace into the wires
(with pliers), until brace is flush
with the splice case.
Close the cover. Check that wire
cannot be pulled out with slight
tug.
The linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location.
The linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location.
The linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location.
